Humzor NEXZSYS NS706, User Manual, Page: 2 / 50

2
Safety Information
For your own safety and the safety of others, and to prevent damage to the device and vehicles upon
which it is used, it is important that the safety instructions presented throughout this manual be read and
understood by all persons operating or coming into contact with the device.
There are various procedures, techniques, tools, and parts for servicing vehicles, as well as in the skill of
the person doing the work. Because of the vast number of test applications and variations in the products that
can be tested with this equipment, we cannot possibly anticipate or provide advice or safety messages to cover
every circumstance. It is the automotive technician's responsibility to be knowledgeable of the system being
tested. It is crucial to use proper service methods and test procedures. It is essential to perform tests in an
appropriate and acceptable manner that does not endanger your safety, the safety of others in the work area, the
device being used, or the vehicle being tested.
Before using the device, always refer to and follow the safety messages and applicable test procedures
provided by the manufacturer of the vehicle or equipment being tested. Use the device only as described in this
manual. Read, understand, and follow all safety messages and instructions in this manual.
Safety Messages
Safety messages are provided to help prevent personal injury and equipment damage. All safety messages
are introduced by a signal word indicating the hazard level.
DANGER
Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury to
the operator or to bystanders.
WARNING
Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury to
the operator or to bystanders.
Safety Warnings
⚫ Always perform automotive testing in a safe environment.
⚫ Wear safety eye protection that meets ANSI standards.
⚫ Keep clothing, hair, hands, tools, test equipment, etc. away from all moving or hot engine parts.
⚫ Operate the vehicle in a well-ventilated work area, for exhaust gases are poisonous.
⚫ Put the transmission in PARK (for automatic transmission) or NEUTRAL (for manual transmission) and
make sure the parking brake is engaged.
⚫ Put blocks in front of the drive wheels and never leave the vehicle unattended while testing.
⚫ Be extra cautious when working around the ignition coil, distributor cap, ignition wires and spark plugs.
These components create hazardous voltages when the engine is running.
⚫ Keep a fire extinguisher suitable for gasoline, chemical, and electrical fires nearby.