26
SmartStrike Advanced Search
Advanced Search Menu Options
See the table below for the available Advanced Search menu options. See
Execute an Advanced Search
for instructions on how to
select settings and execute an Advanced Search.
The available settings and values for some menu options will vary based on the selected lake. For example, the maximum depth value
displayed under Depth will change to reflect the maximum depth of the currently selected lake.
Advanced Search Menu Options
Lake Region
Select the areas of the lake where you want to focus your search. For example, select the entire lake
or inlets, bays, and/or coves only.
The available options may vary based on the currently selected lake.
Depth
Select specific depth values for your search. For example, set a depth range that is between 15 and
20 feet.
The depth values will vary based on the currently selected lake.
To change the units of measurement, go to Settings > General > Units > Depth.
Slope
Select areas of the lake with flat, gradual, moderate, and/or sharp slopes.
The available options may vary based on the currently selected lake.
Aspect
Select a direction or position of the lake for your search, such as Northeast.
The available options may vary based on the currently selected lake.
Sun Exposure
Select the sunny or shady areas (exposure levels) of the lake to search. When an exposure level has
been selected, you may also select the current season and time of day.
The available options may vary based on the currently selected lake.
Proximity
Set the proximity to search a specific distance from a lake feature. For example, you can set the
proximity to search less than 20 feet from the shoreline.
The available options may vary based on the currently selected lake.
To change the units of measurement, go to Settings > General > Units > Distance (Long) or Distance
(Short).
Structure
Set a search that focuses on specific under water structure, such as ledges and drop-offs.
The available options may vary based on the currently selected lake.
