Humminbird 778C Operation Manual Download Page 85

Page: 85 / 110

Temp. Offset

(Advanced)

Temp. Offset

will adjust the temperature readout by the amount entered. This

menu option is available when the User Mode is set to Advanced (see

Main

Menu: User Mode

To change the Temp. Offset setting:

1. Make sure the User Mode is set to Advanced, then highlight Temp.

Offset on the Setup main menu.

2. Press the LEFT or RIGHT Cursor keys to change the Temp. Offset

setting. (-10.0 to +10.0 degrees, Default = 0)

Speed Calibration

(Advanced, with Temp/Speed only)

Speed Calibration

will adjust the speed readout by the percentage entered,

and will appear in the menu if a Temp/Speed Accessory is connected and the
paddlewheel has moved at least once, and when the User Mode is set to
Advanced (see

Main Menu: User Mode

To change the Speed Calibration setting:

1. Make sure the User Mode is set to Advanced, then highlight Speed

Calibration on the Setup main menu.

2. Press the LEFT or RIGHT Cursor keys to change the Speed Calibration

setting. (-20% to +20%, Default = 0%)

Setup Menu Tab

Summary of Contents for 778C















































































































Search results

Summary of Contents for 778C

Reviews:

Related manuals for 778C

Brands by name

Popular brands

Humminbird 778C, Operation Manual

Search results

Summary of Contents for 778C

Reviews:

Related manuals for 778C

Brands by name

Popular brands