Humminbird 778C Operation Manual Download Page 65

Page: 65 / 110

Temp. Alarm

Temp. Alarm

sounds when the water temperature

detected by the Fishing System reaches the Temp. Alarm setting, which is either
set in degrees Fahrenheit or Celsius

[International Models only]

To change the Temp. Alarm setting:

1. Highlight Temp. Alarm on the Alarms main menu.

2. Press the LEFT or RIGHT Cursor keys to change the Temp. Alarm

setting. (Off, 33-120 [Fahrenheit], 0-50 [Celsius], Default = Off)

Alarm Tone

Alarm Tone

selects the pitch of the alarm sound.

A brief tone will be produced as you adjust the Alarm Tone so that you can
select the tone that you can hear best.

To change the Alarm Tone setting:

1. Highlight Alarm Tone on the Alarms main menu.

2. Press the LEFT or RIGHT Cursor keys to change the Alarm Tone setting.

(High, Medium, Low, Default = Medium)

For example, if the Temp. Alarm is set to 58 degrees Fahrenheit, and the water

temperature falls from 60 degrees to 58 degrees, the Temp. Alarm will sound.
Similarly, if the water temperature rises from 56 degrees to 58 degrees, the Temp.
Alarm will also sound.

Alarms Menu Tab

Summary of Contents for 778C















































































































Search results

Summary of Contents for 778C

Reviews:

Related manuals for 778C

Brands by name

Popular brands

Humminbird 778C, Operation Manual

Search results

Summary of Contents for 778C

Reviews:

Related manuals for 778C

Brands by name

Popular brands