54
53
Depth Offset
(Advanced)
Depth Offset
will adjust the digital depth readout to indicate depth from the waterline
or boat's keel. Enter a positive vertical measurement from the transducer to the
waterline to read the depth from the waterline. Enter a negative vertical measurement
from the transducer to keel to read the depth from the keel. This menu choice is
available only when in Advanced User Mode (see
Setup Menu Tab: User Mode
.)
To change the Depth Offset setting:
1. Make sure you are in Advanced User Mode, then highlight Depth Offset on the Setup
menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Depth Offset setting.
(-10.0 to +10.0 feet or -3 to 3 meters
[International Models Only]
, Default = 0)
Temp Offset
(Advanced)
Temp Offset
will adjust the temperature readout by the amount entered. This menu
choice is available only when in Advanced User Mode (see
Setup Menu Tab: User Mode
.)
To change the Temp Offset setting:
1. Make sure you are in Advanced User Mode, then highlight Temp Offset on
the Setup menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Temp Offset
setting. (-10.0 to +10.0 degrees, Default = 0)
Select Readouts
(Advanced, Sonar view only)
Select Readout
s sets individual digital readouts on the Sonar View. This Advanced
feature allows you to select what data will be displayed in each of 6 fixed-position
data windows arranged around the left and bottom edges of the Sonar View
screen, or whether a particular window will be turned off, displaying nothing in
that area; you can access this menu choice only when in Advanced User Mode
(see
Setup Menu Tab: User Mode
.)
Data windows can display readouts from supported
accessories such as Temp/Speed. Each data window
can either be empty or contain one of the following:
- Speed
(will be displayed if a Temp/Speed Accessory
is attached and the paddlewheel has moved at least
once, or if a GPS Receiver is connected)
- Temperature
- Triplog
(will be displayed if a Temp/Speed
Accessory is attached and the paddlewheel has
moved at least once, or if a GPS Receiver is
connected)
- Voltage
- Water Spe
ed (will only be displayed if a
Temp/Speed Accessory is attached and the
paddlewheel has moved at least once). Water Speed
is not available with a GPS receiver.
Select Readouts
531474-1_A_777c2_English.qxd 11/3/2005 8:02 PM Page 60
