manualshive.com logo in svg

Humminbird 531338-1_C, Operation Manual

The Humminbird 531338-1_C Operation Manual is a comprehensive user guide designed to help you understand and operate your Humminbird device. This essential manual is available for free download from manualshive.com, allowing you to access the information you need to maximize the performance of your product.

Share
Download
background image

iv

Setup Menu Tab

44

Units - Depth ................................................................................................................................................ 45
Units - Temp 

(International Only)

........................................................................................................ 45

Units - Distance 

(with Temp/Speed or GPS Receiver)

.................................................................... 45

Units - Speed 

(with Temp/Speed or GPS Receiver)

........................................................................ 46

User Mode...................................................................................................................................................... 46
Language 

(International Only)

.............................................................................................................. 46

Triplog Reset 

(with Temp/Speed or GPS Receiver)

.......................................................................... 47

Restore Defaults .......................................................................................................................................... 47
Select Readouts 

(Advanced: 3D and 2D Sonar Views Only)

........................................................ 48

Depth Offset 

(Advanced)

.......................................................................................................................... 50

Temp Offset 

(Advanced)

.......................................................................................................................... 50

Speed Calibration 

(Advanced: with Temp/Speed Only)

.............................................................. 50

NMEA Output 

(Advanced)

........................................................................................................................ 51

Views Menu Tab

52

Accessories Menu Tab

53

Troubleshooting

54

Matrix® Doesn’t Power Up ...................................................................................................................... 54
Matrix® Defaults to Simulator with a Transducer Attached  ...................................................... 54
Display Problems.......................................................................................................................................... 55
Finding the Cause of Noise ...................................................................................................................... 56

Matrix® Fishing System Accessories

57

Specifications

58

Contact Humminbird®

59

NOTE:

Entries in this Table of Contents which list (International Only) are only available on products

sold outside of the US and Canada by our authorized International Distributors.  To obtain a list of
authorized International Distributors, please visit our website at 

www.humminbird.com

or contact

our Customer Resource Center at 1-800-633-1468 to locate the distributor nearest you.

NOTE: 

Entries in this Table of Contents which list (with PC Connect Cable Only) require the purchase of

a separate accessory.  You can visit our website at 

www.humminbird.com

to order accessories online

or contact our Customer Resource Center at 1-800-633-1468.

Table of Contents 

Summary of Contents for 531338-1_C



































































Reviews:

No comments

Related manuals for 531338-1_C

Navman TRACKFISH 6500 Installation And Operation Manual preview
TRACKFISH 6500
Brand: Navman Pages: 88
Garmin STRIKER PLUS 5 Installation Instructions Manual preview
STRIKER PLUS 5
Brand: Garmin Pages: 15
VEXILAR FL-8SE Operation Manual preview
FL-8SE
Brand: VEXILAR Pages: 15
Hobie Kit III Instruction Manual preview
Kit III
Brand: Hobie Pages: 10

Brands by name

Popular brands

Load more brands