Hummer 2006 H2 Owner'S Manual Download Page 341

Page: 341 / 502

Hood Release

To open the hood, do the following:

1. Release both hood side latches.

2. Pull the handle with this

symbol on it. It is
located inside the
vehicle to the lower left
of the steering column.

3. Then go to the front of the vehicle and pull the

assist handles toward you to lift the hood.

4. Pull the hood open until it is supported by

the cables.

Before closing the hood, be sure all filler caps are on
properly. To close the hood, do the following:

1. Hold up the hood a few inches from the closed

position and then let it go so that it has enough
force to engage the hood latch.

2. Pull up on the assist handles to be sure that the

hood is latched.

3. Latch both hood side latches.

5-11

Summary of Contents for 2006 H2























































































































































































































































































































































































































































































































Search results

Summary of Contents for 2006 H2

Reviews:

Related manuals for 2006 H2

Brands by name

Popular brands

Hummer 2006 H2, Owner'S Manual

Search results

Summary of Contents for 2006 H2

Reviews:

Related manuals for 2006 H2

Brands by name

Popular brands