Hummer 2006 H2 Owner'S Manual Download

Page: 16 / 502

To return the seatback to an upright position, do the
following:

1. Pull the lever labeled 3 toward you.

2. While still holding lever 3 toward you, grasp the top

of the seat and pull it toward you slightly.

3. Let go of lever 3 and pull the seat completely down.

4. Push down on the seat firmly. Try pulling it up to

be sure it is locked into place.

5. Pull up on the release

lever labeled 1 and
then pull up on
the seatback until the
seatback locks into
the upright position.

1-10

Summary of Contents for 2006 H2























































































































































































































































































































































































































































































































Search results

Summary of Contents for 2006 H2

Reviews:

Related manuals for 2006 H2

Brands by name

Popular brands

Hummer 2006 H2, Owner'S Manual

Search results

Summary of Contents for 2006 H2

Reviews:

Related manuals for 2006 H2

Brands by name

Popular brands