Calibration Stand
Height: 1.75"
Cable Wheel:
Width: 2.94"
Dia: 1.75"
Length: 11.50"
Cable groove width: 0.063"
Cable groove depth 0.063"
Weight 2.2 lbs.
Material: Aluminum
Material: Phenolic
Mounting holes will accept 1/4 dia. flat
head screws
Level vial accuracy:
35 arc minutes
Weight Holder
Base diameter: 2.80"
Platform block:
Base height: 0.438"
Height: l0mm
Material: Nickel plated steel
Width: 18mm
Length: 1.25"
Rod diameter: 0.250"
Pin hole diameter: 0.257"
Length 9.5"
Material: Brass
Material: Stainless steel
Cable diameter: 0.031"
Holder weight (w/o cable & block):
Length: 11"
1.00 lb.
Construction: 7x19
Material: Stainless
Min. breaking: 72 lbs.
Maintenance
No special maintenance is required for the FD-4A adapter other than routine cleaning
of parts with appropriate cleaner. Careful handling is recommended to ensure best
performance. Do not attempt disassembly or repairs.
No special maintenance is required for the DTR-451 digital readout unit and 100-HR
LVDT.
Maintenance on the calibration stand is limited to cleaning off foreign material that
may accumulate and checking the pulley bearing for free rotation. The bearing may be
cleaned and oiled with a light weight lubricant if necessary--avoid heavy greases which
increase friction. Bearing replacement may be required if water enters and damages it.
Check the level on the stand from time to time and make adjustments if necessary. Be
certain that the screws or clamp which secure the stand are tight.
No special maintenance is required for the weight holder assembly other than periodic
inspection of the cable for wear or damage. Replace cable if necessary.
Summary of Contents for FD-4A
Page 1: ...product manual 07 09 H 1021 FORCE DETERMINATION ADAPTER AND DIGITAL INDICATOR ...
Page 2: ......
Page 11: ......
