Humbaur 3000 Series, Operating Instructions Manual

Page: 38 / 106

Electro-hydraulic equipment (optional)
4
36
MACHT’S MÖGLICH
Operating the chassis
WARNING
Leaking battery acid
Battery acid is corrosive. There is a danger of acid
burns if it comes into contact with you.
 Seek medical advice immediately in the event of
contact.
WARNING
Hot batteries
Bridged batteries can become hot - burn hazard!
 Allow bridged batteries to cool down prior to
starting work on them.
NOTICE
Discharged / low supply battery!
A discharged or low supply battery in the trailer can cause
defective motor-starting relays
in the towing vehicle.
 Check the power of the supply battery at regular inter-
vals.
 Fully charge the supply battery via an external battery
charger.
 Maintain the power of the supply battery via a trickle
charge in the event of prolonged disuse.
Electro-hydraulic equipment
- Tipping the cargo bed
Fig. 15 Operating elements of the electro-hydraulic equipment
1 Emergency hand pump
2 Hand button
3 Battery charging socket
4 Plug-in switch socket
The trailer must be coupled to the towing vehicle
before the cargo bed is tipped.
Fig. 16 Activating the electro-hydraulic equipment
1 Plug-in switch
2 Plug-in switch socket
3 Covering cap

Remove the covering cap (Fig. 16 /3).
 Insert the plug-in switch (Fig. 16 /1) in the plug-in switch
socket (Fig. 16 /2).
 Turn the plug-in switch in a clockwise direction to ON.
F - 011 F - 011
4
1
2
3
F - 012
1
2
3