background image

9925252

1

AVOID INJURY OR DEATH

• Never use the vehicle without instructions. Read vehicle labels (decals), 

Owner’s Manual and this Handbook.

• Always fasten seat belt before operating or riding in the vehicle. 
• Keep hands and feet inside the vehicle.
• Polaris recommends using proper protective equipment such as helmets 

and eyewear when required.

• Never use vehicle without Occupant Protective Structure (OPS).
• Do not modify or remove OPS. Replace OPS if damaged.
• Keep away from drop-offs, steep slopes and unstable surfaces.
• Always carry bucket or attachment as low as possible. Slow down when 

turning. Do not make sharp turns. Look in the direction of travel. Never 

attempt jumps or other stunts with the vehicle.

• Load, unload and turn on flat, level ground. Keep load level when raising lift 

arm.

• Travel at appropriate vehicle speeds for the type of terrain, visibility, 

operating conditions and your operating experience.

• Carry a rider only in a passenger seat.
• Keep bystanders away from the work area.
• Secure load in cargo box.
• Do not exceed vehicle load capacities.
• No riders in cargo box.
• Never modify the vehicle or add non-approved attachments.
• Keep PTO shields and all guards in place (if equipped). Keep away from 

moving parts.

• Before leaving the operator seat:

Park on flat level ground.

Lower attachment arm.

Put attachment flat on ground.

Move gear selector lever to Park.

Disengage the PTO (if equipped) and make sure all rotating components 

    are completely stopped.

Stop the engine and remove the key.

OPERATOR’S HANDBOOK

This Handbook is for the

Utility Vehicle Model Brutus HD and HD

PTO

WARNING

Summary of Contents for BRUTUS HD















Reviews: