66
Operating the chassis
Accumulator parking brake
4
Operating the spring accumulator
parking brake
The spring accumulator parking brake is
pneumatically controlled and activated
by the spring accumulator diaphragm
cylinder.
Activating and releasing the spring
accumulator parking brakes several
times lowers the pressure in the system.
If the pressure falls below 5.2 bar, the
spring accumulator parking brake can no
longer be released via the control panel.
The spring accumulator parking brake
can then only be released through the
emergency release unit.
Information regarding the
emergency braking facility is
provided in the maintenance
column from Page
.
Securing the trailer
Pic. 13
Trailer secured
1
Wheel chocks positioned
Check the following before releasing
the spring accumulator parking brake:
- The wheel chocks (Pic. 13 /1) are in
position or
- the trailer is properly coupled to the
towing vehicle.
Releasing the parking brake
Pic. 14
Operating console
without raising / lowering device
1
Operating brake release valve (black)
2
Spring accumulator parking brake (red)
Pull the spring accumulator parking
brake (Pic. 14 /2).
The trailer is braked.
Releasing
Push the spring accumulator parking
brake (Pic. 14 /2).
The trailer is unbraked.
F - 004
1
F - 005
1
2
Summary of Contents for 10000 Series
