Automatic lowering system
Electrical system
153
6
Automatic lowering system (optional)
Pic. 14
Sensor function
1
Loading bridge
2
Inductive sensor
3
Telescopic cylinder
The automatic lowering system is
addressed by an inductive sensor
(Pic. 14 /2).
The sensor detects whether the loading
bridge (Pic. 14 /1) is being lifted or
lowered and supplies the signal to the
automatic lowering system.
If the automatic lowering system has
been activated, the chassis will be
automatically lowered once the loading
bridge has been lifted.
Pic. 15
Sensor position
1
Inductive sensor with LED display
2
Bracket
3
Telescopic cylinder
The inductive sensor (Pic. 15 /1) is
approximately at the centre of a
console (Pic. 15 /2) on the chassis.
LED display:
orange / green = ready for operation
green = activated (lowering)
For technical data / description,
see sensor manufacturer
documentation.
Pic. 16
Disconnection switch (optional)
1
ON / OFF switch
An optional disconnection switch
(Pic. 16 /1) can be fitted to the automatic
lowering system, e.g. for manufacturer
operation.
E - 034
1
2
3
E - 033
1
2
3
E - 035
1
Summary of Contents for 10000 Series
