Quick Setup
1. Check contents of package.
2. Place transmitter near TV or sound source.
3. Connect audio leads between TV and transmitter.
4. Connect power supply to transmitter and plug into mains socket.
5. Place receiver in transmitter charging cradle.
6. Leave receiver in cradle for 14 hours for an initial charge.
7. Switch on TV.
8. Take receiver from charging cradle and wear the receiver. The headset
receiver switches on automatically when you wear it. The Neckloop
receiver has an on/off switch on the rear.
9. Make sure there are no obstructions between you and the transmitter.
10. Adjust the receiver volume to your needs and enjoy your favourite
programmes.
Introduction
Thank you for purchasing the InfraLight Wireless listening system. The system
allows you to listen more clearly to your TV, Radio or HiFi without any need for
trailing wires. It uses Infrared technology, similar to remote controls, to transmit
sound from your TV or other audio equipment to a headset or neckloop receiver.
Before using the system, please read these instructions to benefit from all the
capabilities of the system and give you many hours of reliable listening performance.
The system consists of two parts; a transmitter to pick up sound from your TV or
HiFi and a receiver powered by a rechargeable battery. A headset receiver is for
people without a hearing aid and a neckloop receiver is for people who want to
use the ‘T’ facility of their hearing aid.
The system is delivered with a connection kit to allow you to connect to most
modern audio equipment. An optional microphone can be used where direct
connection is not possible.
More than one listener can use the same transmitter. Receivers of either type can
be used at the same time. The system can charge up to three batteries at the
same time.
2
