Note regarding Landmark configuration: You can directly access Landmark Settings. To do so,
press and hold the
Go
To
button, then select a landmark and press 3. The following options are
made available:
-
Rename landmark
-
Unset landmark as a possible destination
-
Delete landmark
9.15.3
Configuring Routes
Use the arrows to select the route you wish to modify.
Press
Confirm
to load the selected route. Use the arrows to select the operation you wish to
perform on the route. Operations include: Rename and delete.
Press
Confirm
to trigger the selected operation.
Renaming Route:
Upon selecting this option, a beep will prompt you to dictate the new name for the route in
question. After 4 seconds, recording ends with a beep and message. The system exits
configuration mode and announces the current state.
Deleting Route:
Upon selecting this option, the system prompts you to delete the selected route. Press
Confirm
to Delete. Upon doing so, the system exits configuration mode and announces the current state.
Note regarding Route configuration: You can directly access Route Settings. To do so, press the
Go
To
button, select the desired route, then, press 3. The following options are made available:
-
Rename Route
-
Delete Route
9.15.4
Import and export
Upon selecting this option, the system will ask you to select either a Landmark or Route.
Landmarks:
Export landmarks to SD card
Selecting this item will export all your saved landmarks to the $TREKLandmarks folder of your SD
card.
Import landmarks
Selecting this item will import all landmarks found in both the root and the $TREKLandmarks
folder of your SD card.
Delete all landmarks
Selecting this item will delete all landmarks saved on your device. If you are sure you wish to
delete all landmarks, confirm by pressing the
Confirm key
.
Route:
Export routes to SD card
Selecting this item will export all your saved routes to the $TREKRoutes folder of your SD card.
