"Automotive"
"All"
The Trek will then provide you with a list of up to 50 points of interest found within a range of 5
miles (8 km) that correspond to the selected category. Use the
arrows
to select the destination of
your choice, and
Confirm
to begin instructions.
Note that if you do not press
Confirm
on a given landmark / point of interest or Category within
30 seconds, the system will exit the
What's around
feature and will return to
Explore mode
.
9.6.3
Next instruction or Next Intersection
When on an active route, you can preview the next instruction by pressing the
Right arrow
. Trek
will announce the distance to the next instruction followed by the action to be taken. Each time
you press the
Right arrow
the Trek will announce the following instruction. Use the
Left arrow
to
navigate previous instructions. To return to guidance, press
Confirm
at any moment. When in
Explore mode, pressing the
Right arrow
will announce the next intersection you will encounter if
you continue in the same direction.
9.6.4
Pedometer
Pedometer data provides the following information: Walking distance after Trek was activated,
Walking time (does not include time where no movement is detected) and Average walking
speed.
To access Pedometer data, press the
Information
button, then press
Right arrow
twice.
To Reset Pedometer data, go to the Settings menu.
9.6.5
Repeat last message
If you wish to hear the last message or instruction again, press the Playbutton.
9.6.6
General Information
You can obtain information regarding various aspects of the route and the system by pressing the
Information
button (0)
Press the
Information
button to obtain contextual information on the current Trek activity. You will
be given the following information: ON or OFF route, route name, Distance remaining, Distance
traveled, and Route length.
Press
Right arrow
to obtain information on the Quality of the GPS signal, battery status and speed
information.
Press
Right arrow
again to obtain city name, pedometer data and altitude information.
9.7
Record Landmarks
Users can create landmarks any time along their outdoor environment. These act as reference
points or markers and will be detected when the user comes across them. It is highly
recommended to mark any meaningful point in your surrounding that can act as a guiding
element, an obstacle along the way or a possible destination.
To record a landmark:
1. Press the
Record
or the Bookmark button.
2. After the beep, provide a 4 second description of the landmark. A double beep will
indicate the end of the landmark creation. The description and location of the landmark
will be saved by the system.
