Humanware Reveal 16, User Manual

Page: 5 / 68

2
SETTING UP
The Reveal was designed with simplicity in mind. Follow the steps below to quickly get your
device up and running.
1. Carefully remove your Reveal from its box. It will be folded in its carrying position.
2. Place your Reveal on a flat and stable surface, such as a table, while making sure the
HumanWare Logo is upside down in front of you.
3. With one hand, hold the reading tray down onto the table, and with your other hand, lift
up the top of the bridge (where the camera is located). The bridge should lock into
place in its open position. This may require a bit of force.
4. Carefully hold the screen by the sides and pull the bottom of the screen towards you
until you reach a comfortable viewing position.