HumanWare
www.humanware.com
ClassMate
User Guide
Rev.9- 20090202
9
:
Mini USB connector
: This is used to copy books from USB storage devices
or to play material saved on USB memory sticks.
On the right side:
:
Power input jack
: It is used to connect the player to an electrical outlet.
2.1.5 Back Side of the Player
Two features are found on the back side of the player: The
Battery door
and the
retractable
stand
. The Battery door covers most of the back of the player, and the retractable stand is built
around it. To open the stand, locate the finger opening under the front edge of the player and
extend it towards the back.
2.1.6 Battery removal and installation procedure
The ClassMate is shipped with the battery installed.
If you need to change the battery, follow these steps.
To remove battery:
Note: The following instructions assume that the ClassMate is oriented in the correct up
position.
1. The battery compartment is located in the back of the player. To remove the battery door,
you will need to loosen the screw using a standard Philips screwdriver.
2. Lift the battery door and remove from the player. On the right edge of the battery is a
bump near the center, and two tabs on either side. The left edge of the battery has a
finger tab in the middle.
