HumanWare
www.humanware.com
ClassMate
User Guide
Rev.9- 20090202
14
5. From the ClassMate upgrade page, select the download link. Find a location on your
computer where to save this file.
6. The download will be a ZIP file containing a single upgrade (UPG) file.
7. Unzip the UPG file from the download zip file. Note that you do not need any special
unzip software. Windows XP and Vista can unzip the UPG file from the download ZIP file.
Copying Upgrade file
8. You need to place the UPG file in the root of your ClassMate's SD card. There are two
ways to accomplish this. You can either copy the file to the SD card using your
computer's SD card reader,
or
you can copy the file to your ClassMate's SD card directly
by using the USB cable.
Using the SD card reader
Using Windows Explorer, copy the UPG file to the root of the SD card.
Insert the SD card into your ClassMate.
If the ClassMate is on, turn it off.
OR
Using the ClassMate USB cable
Connect the USB cable to your ClassMate.
Connect the other end of the USB cable to your computer.
Turn on the ClassMate- A picture will say that you are connected.
While the ClassMate is connected to the computer by way of the USB cable,
copy the UPG file to the root of your ClassMate's SD card.
Once the copy is done, use the Windows "safely remove device" feature to end
communications between the ClassMate and your computer.
Shut the ClassMate off and unplug the USB cable.
Installing the upgrade
9. Connect the ClassMate to AC power and turn it on.
10. The ClassMate will recognize the UPG file and initiate the upgrade process. You will be
asked to confirm the upgrade. To confirm the upgrade, press the
Play
button. Press any
other button to cancel the upgrade. Audio messages will inform you of the start and end
of the update process which takes about 2 minutes. Note that once upgrade procedure
has started, it cannot be interrupted.
Note that you may use the same UPG file to perform multiple upgrades.
11. Delete the UPG file from the card after updating. To do so, insert the SD card in your
computer's SD card reader and locate the file using Windows Explorer. To remove, select
it using the left mouse button and press the
Delete
button on the keyboard. You can also
delete the file from the SD card using Windows Explorer by way of the ClassMate USB
cable.
2.8.2 Using Windows Explorer for File Transfer
1. Locate on your computer the content (on CD or Hard Drive) you wish to transfer to your
ClassMate.