English 29
Up to 50 photographs can be stored. When the store is full, the oldest
photograph will be overwritten.
Press "Replay"
to view the photographs. Use the Navigation keys
to browse. If you wish to delete a photograph, select "Delete"
in the
according image. When prompted "Delete?", confirm to deleting with
"Yes"
or "No"
to cancel the process.
Viewing and deleting photographs
Management of the stored photographs can also be handled via the
main menu of video receiver. In the case of several registered monitors,
the number of the monitor is displayed for the according photograph.
On order to view or delete photographs, please follow as below:
1. Press any key to switch the display on. Press the menu key
to
enter the main menu. With the navigation keys, select "Snap Show".
Press the left key
(Select) to enter the selection.
2. Use the Navigation keys "
" and "
" to browse.
3. If you wish to delete a photograph, select "Delete"
in the accor-
ding image. When prompted "Delete?", confirm to deleting with „Yes“
or „No“
to cancel the process.
Video receiver: Reset to factory default
In order to reset the video receiver to the factory defaults:
1. Press any key to switch the display on. Press the menu key
to
enter the main menu. With the navigation keys, select "Default set.".
Press the left key
(Select) to enter the selection.
2. Use "
" and "
" to enable or disable the function.
3. Press "Save"
to save the setting.
After resetting, the receiver will return to standby mode.
PLEASE NOTE: All custom settings and stored photographs will be lost!
Video receiver: Setting the alert/ringtone tone volume
The volume of the alert tone can be adjusted in 5 levels. Number „0“ is
silent and „4“ offers maximum volume.
1. Press any key to switch the display on. Press the menu key
to
enter the main menu. With the navigation keys, select „Alert volume“.
This entry can be found on the third page of the main menu.
EN
