English 29
Flash time setup (Inquiry button)
This function is required in order to activate certain T-Net features. If you operate your
device on a telephone system, you may have to change the flash time (see the operating
manual for the telephone system).
Press
Menu
(left softkey)
Setup
Press
OK
(left softkey)
Network
Press
OK
(left softkey)
Recall
Press
OK
(left softkey)
Use the
buttons to select the desired flash time.
Press
OK
(left softkey) to save your settings.
Note:
Press
Back
(right softkey) to return to the menu list.
Note:
The flash time can be set to the following times: 90/270/600 ms. Fixed setting standard
90 ms.
Dial mode setup
Press
Menu
(left softkey)
Setup
Press
OK
(left softkey)
Network
Press
OK
(left softkey)
Dial mode
Press
OK
(left softkey)
Use the
buttons to select the desired dial mode (Tone or Pulse)
Press
OK
(left softkey) to save your settings.
Note:
Press
Back
(right softkey) to return to the menu list.
Note:
Nowadays, most telephone lines use tone dialing.
Key lock
To prevent that you might accidentally make a call, you can activate a key lock. When acti-
vated, all key functions are disabled and therefore the phone is protected from accidental
use e.g. by children. To activate the key lock, proceed as follows:
1. Press down and hold the button until the icon appears in the display.
2. To reactivate the keys, press down and hold the
button until the icon disappears
in the display. The key pad will be activated once again.
