7
B - For installation on work surface positioned against a wall
or through a grommet hole:
NOTE
: Grommet holes must be at least 3” wide
1
Remove the two screws using hex key and detach the clamp
foot bracket from the L bracket.
①
2
Place the L bracket through the desk gap or the grommet
hole and slide it towards the front as far as possible.
②
3
Underneath the work surface, reattach the clamp foot bracket
to the L bracket using the screws from step 1.
③
4
Fully tighten the clamp feet against the work surface.
④
①
②
③
Summary of Contents for M/Connect 2
Page 2: ......