6
Disassemble Clamp
•
Remove the two screws (fig. B) using hex key (fig. D) and detach
the smaller clamp bracket (fig. C) from the larger bracket
STEP 1
Place M/Connect
2
Clamp onto Table
•
Slide mount against work surface edge and
fully tighten clamp screw (fig. A)
INSTALLING M/CONNECT
2
THROUGH A GROMMET
HOLE OR SYSTEM FURNITURE
STEP 1
INSTALLING
M/CONNECT 2
ONTO EDGE OF TABLE
Caution: Maximum weightload of
M/Connect 2
is as follows:
M2: 20 lbs
.
M8: 40 lbs.
M/Flex: 60 lbs.
Do NOT exceed maximum weightload limits.
C
B
D
A
OPTIONAL: INSTALL USB- C CABLE RETAINING CLIP
Turn
M/Connect 2
upside down to access screw hole
•
Screw cable retaining clip into sheet metal base