9
M2 /M8 MONITOR ARM
Adjust Base Clamp for Correct Work Surface Depth
•
Remove set screw (fig. J) from Base using hex key
•
Insert Monitor Arm into the Base stem (fig. K) with its slot facing the rear
•
Reinsert the set screw and tighten until it seats
and the 180º stop* is engaged
(*arm won't be able to swivel past the rear desk edge)
•
Proceed to the "Attach VESA Bracket to Monitor" step
in the main M8 instruction guide
J
K
M/FLEX MONITOR ARM
Adjust Base Clamp for Correct Work Surface Depth
•
Back out the two set screws installed in stem (fig. L)
•
Insert M/Flex post (fig. M) into Base and twist onto internal bolt until fully seated
•
Tighten both set screws evenly (fig. L) to secure post using hex key
L
M
ATTACHING A MONITOR ARM TO M/CONNECT
2