Human Touch pc 300, Use & Care Manual, Page: 4 / 20

5
humantouch.com
4
get ready
Your Human Touch
®
Perfect Chair
®
requires some simple assembly. Just attach
the backrest and footrest frame, body pad, and head pillow, and you’re done!
5
ATTACH THE FOOTREST FRAME
ATTACH THE RECLINE ACTUATOR
1. Remove the two screws from the footrest frame.
2. Insert the ends of the footrest frame into the chair frame (Fig. 1).
3. Using a Phillips-head screwdriver, replace the two screws to secure the footrest frame (Fig.2).
1. Align the mounting point on the recline actuator with the corresponding bracket in the center of the footrest
frame, then insert the hinge pin through the bracket (Fig.3).
2. Install the cotter pin on the end of the hinge pin (Fig.4).
UNPACK THE BOXES
Head pillow
Headrest frame
Footrest frame
Chair frame
SECURE THE CANVAS AROUND THE FOOTREST FRAME
1. Pull the canvas firmly toward the footrest (Fig.5).
2. Wrap the two upper flaps around the footrest frame, then
secure then to the canvas using the hook-and-loop
fasteners (Fig.5).
3. Pull the canvas firmly toward the footrest, wrap the end
flap around the footrest frame, then secure the flap to
the underside of the canvas using the hook-and-loop
fasteners (Fig.6).
4. Pull firmly outward on the two side flaps, wrap them around
the footrest frame, then secure the flaps to the underside of
the canvas using the hook-and-loop fasteners (Fig.7).
Footrest frame
Fig.1
Fig.2
Fig.3
Fig.6
Fig.5
Fig.7
Fig.4
Hinge pin
Cotter pin
Upper flap
End flap
Side flap
Body pad
ENGLISH