Power
1)
Check the power cord.
Make sure the power cord connection to the chair’s power panel on the rear of the
chair is secure and that the power cord is not damaged. If the cord is damaged,
replace it.
3)
Check the wall outlet.
Plug a known working device into the outlet. If the device doesn’t work, the outlet is
likely defective. Plug the chair into a working outlet.
3)
Replace the main PCB. IMPORTANT: This requires a software update; send the
appropriate software update kit with the PCB. If the serial number is below J3215, also
send a remote.
5-23-2016
Summary of Contents for HT-Ascent 4
Page 1: ......
