Now choose a massage mode to suit
your mood.
Your human touch
™
massage
chair lets you customise your massage
using a wide variety of massage modes.
Choose from three stationary massage
modes and a rolling massage, or combine
them! Use the Range button to tailor your
vertical massage range, or the Zone and
Position buttons to target your massage
to a specific area. Or, let the chair take
control – Just select one of the three
auto programs, which alternate between
massage modes and target different
areas of your back. Your human touch
™
massage chair offers maximum flexibility,
to refresh whichever area of your back
you choose.
MASSAGE MODES
Kneading
Kneading
– kneads your back in small, circular motion on
both sides of your spine simultaneously, relieving tension
and soreness by lifting and stretching muscles. Kneading
improves circulation and helps bring vital nutrients to the
spinal area.
Percussion
Percussion
– alternating rapid-tapping strokes along the
spine stimulate both spinal muscles and spinal joint areas,
emulating the percussive massage technique used in sports
medicine for deep muscle therapy. Percussion massage
flexes spinal joints and relieves pressure on the spinal
column, invigorating the entire back area.
Compression
Compression
– presses on spinal muscles and spinal joint
areas using alternating strokes and a gentle rocking motion,
emulating a technique used in sports medicine and in spinal
therapy by chiropractors. Compression spreads and puts
pressure on deep muscle tissue, forcing it to relax, while the
rocking motion loosens spinal joints. This technique aids
in muscle and joint repair due to strain from exercise, long
hours bent over a desk, or just day-to-day stress, and can
improve mobility and overall posture.
Rolling
Rolling
– rolls gently up and down your back near your spine,
gently alternating side-to-side, to warm up and loosen your
muscles and prepare your back for deeper massage. Rolling
massage relieves muscle tension, improves circulation and
relaxes the back. Use rolling mode on its own or combine it
with any other massage mode.
Power
– Lights to indicate that
master power switch is on.
Zone
– Press to further tailor your massage by
focusing it on a 10 cm zone. After selecting this
feature, use the Position buttons to position the
massage rollers to your target area.
Position
(up/down arrows) – Use these buttons
along with one of the stationary massage modes,
to set the massage rollers to the desired position
on the backrest. You can press this button
before or after selecting the massage mode.
The remote control is conveniently
located on the left-hand chair arm.
Whether you use it in place, or remove
it from its docking cradle, the buttons
are ergonomically aligned for easy use.
When changing direction using the Position buttons,
there is a slight pause while the chair gears change.
This is perfectly normal.
take
control
Select an
Auto Program
to relieve your neck/
shoulders, refresh your full back, or release your
lower back, using a variety of massage modes.
Range
–
Press to customise your vertical
massage range for maximum comfort. Extend
the massage range upward into the Relief Zone
for a unique neck massage, or focus it on your
lower back. It’s up to you!
Extended
– extends your massage into the
Relief Zone.
Standard (default)
– focuses your massage
below the Relief Zone.
Low
– concentrates the massage in the lower
portion of your back.
Stop
– Stops the massage and parks the
massage rollers at the top of the backrest.
www.humantouch.com
10
11
ENGLISH (UK)
