10
www.humancaregroup.com
Extention Kit, Floorline LTC
Do not use handset again until foot end
actuator is re-connected electrical
damage may occur!
12.
Loosen but DO NOT REMOVE the two foot
end Bracket Stepped Pivot Bolts (4mm
Allen key) and their Nyloc Nuts (10mm
spanner).
13. Remove the 2 Foot End Bracket Nyloc Nuts
(13mm spanner) and Countersunk Bolts
(5mm Allen key).
14.
Return the kneebreak panel back into
place.
15. Carefully fold the Foot End Pedestal flat
onto the mattress platorm.
16. Now remove the two Foot End Bracket
Stepped Pivot Bolts.
NOTE:
Keep all nuts, bolts and washers
safe.
17. Carefully lift and move Foot End Pedestal
away from the bed frame, to a safe place,
away from work area.
18. Lift the kneebreak panel again for easy
access to the Platform Bolts on the end of
the mattress platform beams.
19. On one side of the bed, remove the 4 x
Foot End Platform Nyloc Nuts (13mm
spanner) on the Platform Bolts that attach
the standard bracket to the mattress
platform beam.
Do not remove the platform bolts.
20. Remove the standard bracket and fit the
new extension bracket, onto the bolts.
Keep extension bracket support tab to the
under side of frame.
