Chapter 1 • Introduction
!
8
1038056-0001 Revision A
Receiver specifications
The Satellite In port connects to an LNB. Table 8 lists the HX260
outroute receiver specifications. Table 9 lists the HX260 mesh
receiver specifications.
Output Voltage
24V
48V is output if 48V is applied to the
48V Input on the rear panel.
Maximum output current when 48V is
output is based on the 48V DC
external power supply's maximum
current rating. 48V output current
cannot exceed 3.8A.
Maximum Output Current @ 24V
2.75A
Transmission Format
Constant Envelope Offset QPSK
(CE-OQPSK), TDMA burst mode
Symbol Rate
256 ksps, 512 ksps,1.024 Msps &
2.048 Msps
Table 7: Linear transmitter specifications (Continued)
Property
Value
Table 8: Outroute receiver specifications
Parameter
Value
Physical Interface
Female F-connector
Input Frequency Band
950 MHz to 2150 MHz
IF Impedance
75 Ohm
Minimum Input Level
-74 dBm
Maximum Input Level
-8 dBm (Composite)
Input Return Loss
>8 dB (Min) from 950 MHz to 2150 MHz into 75 ohm
Symbol rates
1.25 Msps to 45 Msps
Maximum LNB Supply Current
180mA
Table 9: Mesh receiver specifications
Parameter
Value
Physical Interface
Female F-connector
Input Frequency Band
950 MHz to 2150 MHz
IF Bandwidth
36MHz (with +/-1MHz exclusion zone near the receive
LO frequency)
IF Impedance
75 Ohm
Minimum Input Level
-80 dBm
