Hughes HN9000, Installation Manual

Page: 73 / 126

Figure 36: System Control Center button links
Click the button to go to the page identified by the label.
The destination page for each button link is identified below:
Table 8: Button links on System Control Center screens
Description of destination page Destination Button
Displays general status information such as signal strength and
commissioning status. For more information see
System Status
page on page 62.
System Status page System Status
Displays statistics about received data and receive connection
status. For more information see
Reception Information page
on page 63.
Reception Information page Reception Info
Displays statistics about the transmitted data and transmit
connection status. For more information see
Transmission
Information page on page 64.
Transmission Information page Transmission Info
Displays detailed information about the operational status of
the satellite modem. For more information see
Terminal Status
page on page 64.
Terminal Status page Terminal Status
Displays system information such as ST Name (assigned name
of the satellite modem name) and operational software version. System Information page System Info
For more information see System Information page on page
66.
System Status button
The System Status button (only) is a status indicator as well as a link. It changes color to indicate the satellite modem's
current status, as explained in
Table 9: Meaning of System Status button colors on page 59. To see more detailed status
information, click the System Status button to open the System Status page.
Table 9: Meaning of System Status button colors
Meaning Button color
OK – The satellite modem is operating normally.
Green
Degraded – Degraded means performance is degraded for any of the following reasons:
Yellow
• The Web Acceleration not functioning or in progress. Web Acceleration may be
temporarily inactive while you are browsing on a secure HTTP site (https).
• The modem is in fallback mode.
• A number of transmissions beyond a certain threshold have not been received by
the satellite (state code 30). This could be caused by weather conditions.
59
Chapter 8 HN9000 Satellite Modem Installation Guide
1037576-0001 Rev. A