THE DIGITAL SATELLITE RECEIVER’S MENU SYSTEM
P
AGE
7-7
Lock/Unlock
{
XE "MAIN MENU:
Lock
"
}
When you first receive your satellite system, it will be unlocked; (i.e., no
limits or restrictions are in effect). To enforce the limits (spending, ratings, and “Family” favorite list),
you must lock the system.
When the button on the
MAIN MENU
reads
Lock
, no lock symbol appears at the top of the menu
screen, indicating that the system is unlocked.
NOTE: Once the digital satellite receiver is locked, only existing
Family
list channels will be
accessible. If the
Family
list has not had channels added to it, no channels can be viewed without
first unlocking the digital satellite receiver. To avoid this inconvenience, verify the contents of the
Family
list before locking the digital satellite receiver.
Locking Procedure
When the
Lock
button is selected, the
LOCK SYSTEM{
XE "LOCK SYSTEM screen"
} {
XE "LOCK
SYSTEM" \t "
also see Unlock
"
}
pop-up panel is displayed. Use the
and keys or the remote control number keys to enter a four-digit
passcode of your choosing. If you enter the code using the number
keys, you will not see the numbers appear on the screen. After
entering a four-digit passcode, highlight and select
OK
to proceed.
Otherwise, choose
Cancel
to cancel the locking process.
If you continue, you will be asked to confirm the code by entering it
again in the same fashion as before. Once again, highlight and select
OK
to proceed. Otherwise, choose
Cancel
.
Once
OK
has been selected, the digital satellite receiver is locked.
The button previously used to lock your system is now used to
unlock your receiver. A lock symbol appears at the top of every
menu screen to remind you that the digital satellite receiver is
locked.
REMEMBER YOUR CODE! You will need this code whenever you wish to override the lock or to
unlock the digital satellite receiver.
Unlocking Procedure
{
XE "MAIN MENU:Unlock"
} {
XE "Unlock" \t "See SYSTEM UNLOCK"
}
To remove the lock and
its restrictions, highlight the
Unlock
button and press the
key.
When the
SYSTEM
UNLOCK{
XE "SYSTEM UNLOCK screen"
} {
XE "SYSTEM UNLOCK" \t "
also see Lock, and Lock Override
"
}
pop-up panel appears, you can use the and keys or the remote
control number keys to enter the four-digit passcode that you used to
lock the digital satellite receiver earlier. If you enter the code using
the number keys, you will not see the numbers appear on the screen.
After entering the passcode, highlight and select
OK
.
Once the
digital satellite receiver has been unlocked, all limits and
restrictions are removed!
Otherwise, choose
Cancel
to keep the
lock in effect.
If you forget your four-digit code, call your service provider for
assistance.
The LOCK pop-up panel
The UNLOCK pop-up panel
Summary of Contents for HIRD-D2
