background image

For your safety and protection, read this entire Owner's Manual before you attempt to install or use your satellite 
system. In particular, read this safety section carefully. Keep this safety information where you can refer to it if 
necessary.

Heed Cautions–

All cautions on the product and in the operating instructions should be adhered to.

Follow Instructions–

All operating and use instructions should be followed.

1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in 

accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as 

radiators, heat registers, stoves, or other apparatus 
(including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or 

grounding-type plug. A polarized plug has two 
blades with one wider than the other. A grounding 
type plug has two blades and a third grounding 
prong. The wide blade or the third prong is 
provided for your safety. If the provided plug does 
not fit into your outlet, consult an electrician for 
replacement of the obsolete outlet.

10. Protect the power cord from being walked on or 

pinched particularly at plugs, convenience 
receptacles, and the point where they exit from the 
apparatus.

11. Only use attachments/accessories specified by the 

manufacturer.

12. Unplug this apparatus during lightning storms or 

when unused for long periods of time.

13. Refer all servicing to qualified service personnel. 

Servicing is required when the apparatus has been 
damaged in any way, such as power-supply cord or 
plug is damaged, liquid has been spilled or objects 
have fallen into the apparatus, the apparatus has 
been exposed to rain or moisture, does not operate 
normally, or has been dropped.

Important Safety Instructions

THESE CAUTIONS AND SYMBOLS APPEAR ON THE BACK OF THE RECEIVER

WARNING or CAUTION

Double insulated systems are protected
by additional board clearances and
creepage, so that the unit will not be a
safety hazard to the end-user.

IMPORTANT SAFETY INSTRUCTIONS

RISK OF ELECTRICAL SHOCK

DO NOT OPEN

CAUTION

iii

Summary of Contents for HAH-SA

























































Reviews: