Hughes EchoStar Mobile 4500, User Manual, Page: 13 / 41

Chapter 3 • Using the Web UI
H62751 Revision C
13
Chapter 3
Using the Web UI
3.1 Accessing the Web UI
The Hughes 4500 includes an internal Web User Interface (Web UI). To access the Web UI, open your
preferred web browser and enter the internal IP address of the terminal.
•
If you are using an Ethernet port, enter this Ethernet IP address:
–
http://192.168.128.100
•
If you are using a USB port, enter this maintenance IP address:
–
http://169.254.1.1
The Web UI opens up to the
Terminal Status
page. Along the top of all Web UI pages are icons
representing the categories of available subpages: Home, Connections, Settings, Usage, and Support .
3.2 Home page
The Home page shows the current terminal status and allows user to set up the initial data connection.
On the left side of the page is the Status bar. These items are updated automatically when the status of
any item changes.
1.
Connection:
This field indicates whether you are registered with the EML Network. It also shows
the receive signal strength and if you are registered with the IMS.
2. Position: This field displays the current position status. If the terminal acquired a GPS fix, it will
display the latitude, longitude, altitude, the last time the GPS position was updated and the
geocoordinates in the Military Grid Reference System (MGRS). The time is displayed in UTC.
3. Terminal Properties: This field indicates miscellaneous status information.