Hughes Direcway DW4000 Installation Manual Download

Page: 13 / 78

Installing the system

Installing the system

Professional
installation or
service
requirement

Professional installation and service of the
two-way satellite dish assembly is required by
the Federal Communications Commission.

The two-way satellite dish assembly must be
installed in a location or manner not readily
accessible to children.

The two-way satellite dish assembly must be
installed at least 5 feet (1.5 meters) above ground
level or any nearby ace on which a person could sit
or stand.

CAUTION

• The two-way satellite dish assembly emits

radio frequency energy when in the transmit
mode.

• Unplug indoor power connection before

performing maintenance or adding
upgrades to any satellite dish components.

• To avoid risk of injury, do not place head or

other body parts between feed horn and
reflector when system is operational.

Prohibited area

(when operational)

Summary of Contents for Direcway DW4000















































































Search results

Summary of Contents for Direcway DW4000

Reviews:

Related manuals for Direcway DW4000

Brands by name

Popular brands

Hughes Direcway DW4000, Installation Manual

Search results

Summary of Contents for Direcway DW4000

Reviews:

Related manuals for Direcway DW4000

Brands by name

Popular brands