Red flags on Transmission Information page
If you see a red flag next to Transmit Status on the Transmission Information page, see Transmit
Status in
Table 6: Red flags on System Status page
on page 20. The information for Transmit
Status in that table also applies to the Transmission Information page.
Terminal Status page
The Terminal Status page displays information about the operational state of the satellite modem
and operational statistics such as messages and packets sent, received, and dropped. It indicates
whether acceleration is enabled and provides a count of traffic that moves across the LAN to
the satellite modem.
Figure 18: Terminal Status page (top part)
The operational parameters listed on the Terminal Status page are shown in a tabular format.
The first (left) column identifies the parameter categories:
• Overall Status – Shows the major features such as dial backup or acceleration. (Some listed
features may not be included in your service plan.)
• Transport Interface Receive Statistics – Indicates messages received and decoded by the
satellite modem from the satellite.
• Transport Interface Transmit Statistics – Indicates messages being queued up by the satellite
modem for transmission to the satellite.
• LAN Interface Statistics – Shows traffic across the LAN interface to the satellite modem.
• IP Forwarding and Routing Statistics – These refer to system control messages.
• Local IP Interface Statistics – Sum of various counts of messages.
• Dial Backup Status – This category of parameters does not apply to the HN9000 modem.
HN9000 Satellite Modem User Guide
26
1037577-0001 Revision F
System Control Center
Chapter 2
