2
Kids Ride-On
Thank you for your purchase.
If this product does not meet your expectations, if
you have any questions or if there are any
damaged parts, before returning it to the store,
please contact customer service.
These instructions are generalized for direct drive
ride-on products. The image might not look
exactly like your product, the assembly
instructions and warnings are correct.
Please keep this sheet for future reference.
WARNING:
Adult assembly is required. Keep
small loose parts and plastic bags
out of the reach of children.
WARNING:
1)
Adult supervision is required.
2)
Obey all local laws.
3)
This unit is recommended for ages 3 years & up.
4)
Max weight is 60 lbs. (27 kg)
5)
Never ride with more than one person.
6)
Do not ride the product over large objects.
7)
Ride on smooth paved surfaces away from motor
vehicles.
8)
Do not ride the product near steps, sloped driveways,
hills, roadways, alleys, and swimming pool areas.
9)
Do not ride at dusk, at night or at times of limited
visibility.
10)
Do not ride the product in wet weather.
11)
Wear protective clothing when using the product,
including an approved helmet and shoes.
12)
Do not ride wearing anything that obstructs hearing or
visibility.
13)
Replace worn or broken parts immediately.
14)
DO NOT REMOVE THE STABALIZING WHEELS
15)
THIS IS A DIRECT DRIVE PRODUCT, IT DOES NOT HAVE
A BRAKE
Assembly Instructions
Note:
All models may not have all parts and features shown. Assembly of all models is
similar.
Assemble the product as shown in the diagram. Some items may have been pre-
assembled.
1)
Install the fork onto the frame as shown, with the slot in the steerer tube oriented
toward the rear.
2)
Place the clamp assembly onto the steerer tube with the open end of the clamp
in-line with the slot in the steerer tube.
3)
Slide the clamp cover as far up the stem as possible.
4)
Insert the handlebar stem into the steerer tube. Ensure the minimum insertion
mark on the stem is not visible – below the top of the steerer tube.
5)
Align the handlebar so that they are perpendicular with the rear wheel.
6)
Secure the handlebar in the steerer tube with the clamp.
7)
Check that the clamp is tight enough so that the handlebar will not rotate inside
the steerer tube.
8)
Install the seat onto the frame (this is pre-assembled on some models). Ensure
that the minimum insertion mark on the seatpost is not visible – below the top of
the frame.
9)
Ensure the seat clamp hardware is sufficiently tightened to hold the seat firmly
onto the frame.
10)
Insert each front wheel lug into the fork tube as shown. (This is easily
accomplished with the product upside down resting on the handlebar & seat.)
Secure the lugs onto the fork with the hardware. Sufficiently tighten the hardware
to hold the lugs.
11)
Install the side plates using the hardware provided (ties, screws or snaps).
12)
Insert the rear wheel into the frame.
13)
Install the wheel stabilizers and hardware as shown. Ensure the anti-rotation tab
on the stabilizer hardware is located in the slot in the frame. Sufficiently tighten
the rear axle hardware to hold the wheel onto the frame.
Note
: The wheel stabilizers are not intended to be removed. The product will be
difficult to ride without them.
14) Install any accessories provided.
15) Ensure all the hardware is tight, and will not come off.
Check the product and secure all fasteners before each use.
All components are warranted against manufacturing defects for six (6) months from the date of purchase.
Parts List
Description
Qty
Frame
1
Front Wheel Ass’y____
1
(includes pedals)
Fork Ass’y__________
1
Handlebar Ass’y
1
Seat & Seatpost Ass’y
1
Wheel Stabilizer Ass’y
2
Stem Clamp Ass’y
1
Stem Clamp Cover
1
Front Wheel Hardware
2
Rear Wheel Hardware
2
Seat Mount Clamp & H’ware 1
Fork Stem Bushings_
2
Side plates _________
2
Accessories: (some models)
Front & Rear Fenders
Handlebar
Pad
Handlebar
Plaque
Handlebar Sound Plaque
Front
Basket
Streamers / Bell
English
Kids Ride-On
