8
Assembly
Assembly
2
3
STEP 1: Install the Steering
Wheel:
• With Steering Wheel facing
forward, connect the steering
wheel wire plug to the plug ex
-
tending out of the car body hole.
• Put the connected plugs and
wires down into the car body
hole.
NOTE:
Ensure wires are not
pinched our bound up.
• Remove screw and nut from
steering wheel
• Install the steering wheel
A
onto the Steering Rod end, and
install the steering wheel Screw
B
and Nut
C
.
• Tighten Screw
B
securely.
STEP 2: Install the Windshield and
Rear View Mirrors:
1. Fit the Windshield tabs into the re-
cess holes and snap into position.
2. Put the Rear View mirrors into the
recess holes.
NOTE:
• There is a Left and Right Mirror.
• The mirror can be turned inwards by
90°.
STEP 3: Install the Drive wheels:
1.
Remove axle cap from both ends of
axle. (Ensure washer is on axle)
2.
Attach both Rear wheels by fitting
wheels fully onto the Axle while push
-
ing in the center hub-cap button until
the wheels SNAPS into place.
• Ensure gears are engaged.
• It may require some additional effort to
secure the wheel to the axle.
Check that the wheels are secure
before use.
Assembly
A
B
C
1
1a
Car body hole
Plug
