Huebsch Filter-Aire 2000, User Manual

Page: 7 / 13

7
Installation
Pre-installation Precautions
Do not install in the following types of location:

Where the temperature can be below 14⁰F (-10⁰C) or above 104⁰F (40⁰C)

Where the unit may come into direct contact with water

Where the unit will be in direct or strong sunlight

If there is a lot of condensation in the environment

If there are corrosive, neutral or reductive gases present
Installation location

ADA considerations

Install the unit in a position where it will be easy to use. Note that if the unit is installed too low,
it may get wet while the floor is cleaned.

Ensure the space between the bottom of the unit and the floor is more than 6 inches as the
power operation system is located on the bottom.

It is recommended that there be a minimum of 4 inches should be clearance on either side of
the unit.

Avoid locations where people or a door might damage the unit.

Choose a completely flat wall surface to install the unit.
The Plug and Sockets
The unit must be installed per local electrical code. The unit should be connected directly to a 3-prong
GFI outlet. The outlet should be located at least 8” and no more than 11” away from the unit and never
directly above or below the unit.