6
Front Axle
TYPE—I-Beam, Reverse Elliott with
Inclined Spindle Pins
SPINDLE PIN THRUST BEARING
TYPE —
Radial Thrust Ball Bearing
TOE-IN—Zero to 1/8"
CASTER ANGLE—Zero to 1º backward
CAMBER-1°
TIE Rod—Rubber Silenced Joints
Brakes
TYPE-4 Wheel Cable Control with
Vacuum Booster
SIZE-13" Diameter—Lining Width,
1¾"; Thickness, 7/32 "
CLEARANCE BETWEEN LINING
AND DRUM—.014" at adjusting screw;
.008" at anchor pin
Steering Gear
TYPE—Variable Pitch Worm and
Sector
GEAR REDUCTION-17 to 1
STEERING COLUMN HEIGHT—
Adjustable to Five Positions
Tires
SIZE-119" W. B.-17 x 6.00; 132"
W. B.-17 x 6.50
AIR PRESSURE—Minimum 32 pounds,
Front and Rear
Chassis Dimensions
WHEELBASE
Standard Series 119" .
Major Series 132"
OVERALL LENGTH
(including bumpers)
185¾"
198¾"
Keys
Keys are numbered to correspond to the lock. Since it is necessary to conceal the number
on the lock for theft protection, the key number should be noted on your identification card or
in some other accessible place. Keys can be supplied only by number. For your own
protection in case of loss of keys, record the numbers.
H U D S O N E I G H T
TECHNICAL INFORMATION
