Page
20
of
32
Ver 1.0 2/20
Audio……………………………………………………………………………………………………………
Click “
Audio
” - the audio parameters may now be set in the right side area.
Audio Switch:
Enable or Disable audio embedding
Audio Encoding:
AAC
Audio Sample Rate Options:
16K, 44.1K, or 48K
Audio Bit Rate Options:
96K, 128K, or 256K
Noise_Cancel_Level:
0, 1, 2, or 3
Input Type / Parameters:
3.5mm Line Input requiring
A stereo un-balanced line level input
(No amplification or power is supplied from the cameras 3.5mm port)
Input Vol L Settings:
Adjusts the volume of the left audio channel (-97 to +30dB)
Input Vol R Settings:
Adjusts the volume of the right audio channel (-97 to +30dB)
ADTS Options:
Audio Data Transport Stream – Can be set to ‘On’ or ‘Off’ (Use with MJPEG
only)
Apply and Cancel Buttons:
After modifying the parameters, press the “
Apply
” button to save.
Press the “
Cancel
” button to discard any changes not applied yet.
