Ver 1.2 6/15
Ceiling Mount…………………………………………………………………………………………
Step 1:
Ceiling
Bracket
Ceiling
For hard ceilings Use the supplied plastic anchors and screws to fix
the ceiling bracket to the ceiling.
For acoustic tile ceilings cut a piece of plywood 12” x 23.75” to use
as a tile bridge above the ceiling tile. Use the supplied screws
(without plastic anchors) to fix the ceiling bracket to the plywood,
sandwiching the ceiling tile in between. Do not over-tighten.
NOTE: The four raised areas of the ceiling bracket must face
towards the ceiling.
Step 2:
Slotted bolts
Use the two slotted bolts to fix the
camera bracket to the bottom of the
camera body. The 1/4 -20 bolt is for the
threaded insert in the camera body. The
smaller bolt threads into the bracket and
pins the camera in place using the
unthreaded opening on the camera body.
Camera Bracket
Step 3:
Slide the camera bracket assembly on to
the ceiling bracket, allowing the 2 slotted
bolt heads to fit over the large keyhole
opening in the ceiling bracket. Slide the
camera and camera bracket until both
bolt heads are fitted into the narrower
slot of the large keyhole opening.
Step 4:
Use the locking screw to lock the ceiling and camera
brackets together to finish the installation
