Huck 2480 SERIES, Instruction Manual, Page: 17 / 34

2480 & 2481 series Tooling
(HK970)
Alcoa Fastening Systems
17
1. Loosen set screw in top of button - -
use 5/64 hex key. Remove button.
2. Unscrew switch from housing.
3. To remove male connector from
control cord, unscrew two screws at
connector.
NOTE - When removing air hose from
either fitting, slice hose length-
wise, at fitting, just enough to
remove easily. Then, cut hose
squarely across to be ready for
assembly.
1. After unscrewing nut from quick dis
connect body, cut and remove hose.
2. After removing hose from trigger housing,
unscrew air fitting from housing.
3. Unscrew air trigger assembly from
housing. Remove O-ring from stem - -
pull stem out. Remove O-ring from
housing.
A
IR
T
RIGGER AND
H
OSE
A
SSEMBLY
(Refer to fig. 7a)
Figure 7a
S
WITCH AND
C
ORD
A
SSEMBLY
(
Refer to fig. 7)
Figure 7
D
D
ISASSEMBLY
ISASSEMBLY
(
(
CONTINUED
CONTINUED
)
)