EN - ENGLISH – 01/2020
Translation of original instructions
6
EN
Reproduction is prohibited
5. When the winch is used at an angle, the
roller fairlead
guides the cable onto the drum. This
minimises damage to the cable caused by abrasion on the winch support or the vehicle
bumper.
6. The
gearbox
converts the power of the motor into an extreme pulling force.
7. A braking action is automatically applied to the drum when the motor is stopped and the cable
is loaded. The braking action is complemented by a
separate mechanical brake
.
8.
The clutch
allows the operator to manually disengage ("DISENGAGE") the drum from the
gearbox. "ENGAGE" locks the drum to the gearbox.
9.
Solenoid:
Power from the vehicle battery feeds the winch motor via a sealed switch.
10. The power switch cables have a double switch to turn the winch on or off. The
remote control
allows you to keep a safe distance from the cable when it is loaded.
11. The
wireless remote control
(optional, contact us): allows you to control the winch from a
distance of up to approx. 15 metres.
12. The winch can be supplied with a
mounting plate
(optional, consult us) which can be mounted
on most flat surfaces such as trailers, bumper steps, truck beds, etc. The mounting plate also
has holes for attaching the roller fairlead.
13. The winch can also be supplied with a
pulley block
(optional, contact us) to double the winch’s
pulling power or change the pulling direction without damaging the cable. We recommend that
you use a double line and a pulley block when pulling more than 70% of the rated pulling load.
6.2. Technical specifications
Specification
EN17500U12A
EN17500U24A
Rated Force
7 938 kg
Motor: in series
12 V
24V
Input : 5,4 kW
Output : 2,9 kW
Input : 6,0 kW
Output : 3,1 kW
Gear ratio
430 : 1
Cable (Dia. × L)
Ø 12 mm × 26,5 m
Drum size (Dia. × L)
Ø 89 mm × 217 mm
Mounting dimensions / Mounting
bolts
254 mm × 114,3 mm - 254 mm x 165,1 mm / 8-M12
Net weight (kg)
67