12
2.3.3 Calibrating the 3-axis gimbal
After both the H906A and aircraft have properly paired, please check the gimbal’s status and condition. If the gimbal
is not horizontally aligned, please calibrate it with the steps listed below.
Calibration steps:
1. After completing gimbal and camera installation, disconnect
the gimbal’s transmission line from the gimbal. Connect the
aircraft to its battery.
2. Make sure that the aircraft is on a perfectly flat surface. Do
not move, touch or bump the unit.
3. The 3-axis gimbal will complete the calibration autonomously
in around 60 seconds.
