(2) Motor(s) are/is installed incorrectly. Check to make sure that each motor is
installed correctly: each motor has two differently colored motor wires. Please check
the figure on how to redo incorrectly installed motors.
Top View
9. How to remove and install LEDs
Disassembly: Remove body screws; detach the body shell halves and all 4 feet.
Desolder the selected LED's red and yellow wires from the PCB.
Installation: Solder the red wire of the selected to the positive pole (+), the yellow
wire to the negative pole (-). Press the LED wires into their designated grooves in the
aircraft arms; do the same for the motor wires. Screw the body shell back together
and reinstall the aircraft feet. You can identify the color of each LED based on the
color of the tube underneath the lamp shade: the blue LED's tubing is blue and the
red LED's tubing is red.
White
Black
White
Black
Black
Red
Blue
Red
LED
LED
LED
M
M
M
M
LED
A
A
A
A
B
B
B
B
LED
LED
Red Wire
Yellow Wire
LED
LED
1. First align, press the LED wires into
their designated grooves in the
aircraft arms. Make sure that the
black casing underneath the LED's
lamp head faces outward.
2. Put the LED lamp head through its
designated cavity and carefully thread
the LED wire through the grooves in
the selected LED's foot.
Installation Complete
20
