05
4 Binding the aircraft and transmitter
1 . Pull and hold the throttle to its lowest position. Hold down the Photo key and
power the transmitter on; allow the transmitter to enter binding mode.
2
.
Power the HS001 on by pushing the power switch up. Long press the display’s
binding button (shown below) to allow the HS001 to enter binding mode. The
display will beep three times.
3
.
Connect the drone to its battery. While all units are in either binding or pairing
modes, please do not touch, press or move any of the transmitter joysticks,
buttons or keys. Doing so will cause the aircraft to drift or perform unstably during
flight. After binding is successful, the transmitter’s binding status LED will be a
solid blue.
All illustrations are shown in Mode 2 (American hand)