UO-EPB-1
Operating and configuration instructions
UO-EPB1_Manual-en_R1
9
3 Assembly
3.1 Safety information
WARNING!
● Assembly and disassembly may only be carried out by qualified personnel.
Observe the safety information in section
● In general, the requirements and acceptance conditions for the system as a
whole must be observed.
DANGER! ATTENTION!
Danger of death, severe physical injury and/or property damage due to
deactivating safety functions, caused by an unsecured shaft drive.
● In general, the requirements and acceptance conditions for the system as a
whole must be observed.
3.2 Basic regulations
WARNING!
● Power and signal lines must be installed separately.
● Observe the manufacturer’s information when installing converters, shielding on
power lines between the frequency converter and motor.
● Ensure the energy supply is sufficient for the application.
3.3 Replacing the function module
When replacing function modules, observe the following:
The new function module must have the same item no. (ID) as the old one.
When recommissioning the replaced function module, a secure test run must be completed
first to ensure it functions correctly.
