Hubner FGH 8, Operating And Assembly Instructions Manual

Page: 13 / 30

Incremental hollow shaft encoder FGH 8
FGH8_MANUAL-en_R6(2018-11-19)ID74584.docx
13
4 Transport, packaging and storage
4.1 Safety instructions for transport
CAUTION!
Material damage caused by improper transport!
Observe the symbols and information on the packaging:

Do not throw - risk of breakage

Keep dry

Do not expose to heat above 40 °C or direct sunlight.
4.2 Incoming goods inspection
Check delivery immediately upon receipt for completeness and possible transport damage.
Inform the forwarder directly on receipt of the goods about existing transport damages (prepare pictures
for evidence).
4.3 Packaging / disposal
The packaging is not taken back and must be disposed of in accordance with the respective statutory
regulations and local guidelines.
4.4 Storage of packages (devices)
Keep dry
Keep packages dry and free from dust; protect from moisture.
Protect against heat
Protect packages from heat above 40 °C and direct sunlight.
If you intend to store the device for a longer period of time (> 6 months) we recommend you use
protective packaging (with desiccant).
NOTES!
Turn the shaft of the device every 6 month 10 times to prevent a possible hardening of
the grease-filling of the ball bearings, which may lead to the destruction of the device.