[11] POWER SUPPLY
Selecting the operating voltage of the amplifier.
Operating voltage
Ub - high
Ub + high
ca. +/-45 V
Off
Off
ca. +/-90 V
On
On
[12] INPUTS 50 OHM / 100 KOHM
The signal inputs of the amplifier can be switched on and off by clicking on the box.
[13] OUTPUT RELAY
The signal output of the amplifier can be turned on and off by clicking the appropriate box.
4.3.1 Connect Menu
The available amplifiers are listed with their corresponding port. A connection is established after
clicking on ‘Select device and confirm here’.
The device name can be freely changed by a double-click on a list entry (please note tool tip).
With the aid of ‘Check Devices’, connected devices can be searched for renewed.
A1230-02
A1230-MultiChannel-Control Software
Page 16
