30
Comfort menu
Here one can switch to the whole range of functions.
Please also note the chapter on
Comfort menu
, where further functions of the comfort
menu are described.
Display modes
Following functions are available:
1.
Standard: Values are displayed numerically (valid for all temperature control
devices with Unistat Pilot and CC-Pilot).
2.
Graphic: Internal temperature, process temperature and set-point are displayed
graphically – valid for Unistat Pilot. (with CC-Pilot only possible with Exclusive or
Professional upgrade package).
3.
Device message: please see following example (valid for all temperature control
devices with Unistat Pilot and CC-Pilot).
4.
Status Interfaces: Information on switch condition of e.g. ECS and POCO /
ALARM (valid for all temperature control devices with Unistat Pilot and CC-Pilot).
5.
Large display: Values are displayed in large numerical format (valid for all
temperature control devices with Unistat Pilot and CC-Pilot).
6.
Summary 1: Service information (valid for all temperature control devices with
Unistat Pilot and CC-Pilot).
7.
Return to main menu
Display modes
is used to select the required display or information window (e.g. Status
Interfaces or Device message). The standard setting is
Graphic
.
Example: Display on choosing
Device message
.
By turning the rotary knob / key (61) one can display the individual messages. Take
note of the message counter for reference.
Message in clear
text
Date / Time of the
Message
10.04.06 3/100
17:11:39
Message-ID:
-16427
Actual status:
0x000F
Pump running
compressor stopped
Heating on
Manual set-point active
2nd set-point not active
Mains frequency. 50Hz detected
230V AC 1 Phase
Extended Status:
0x000D
Compressor on
Fan on
Power isolation relays activated
Status information in
clear text.
Status information in
clear text.
Message - counter
Message - number
Info: present Status
Info: extended Status
